Idiomas disponibles
Idiomas disponibles
GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1
MRA screen
4
16 x 6 x 2mm Neoprene
4
M5 x 16mm domed screw
4
cover black Typ K1
4
Collar M5, Type R2 , 000 nature
Fitting the screen to the motorcycle:
1. Unscrew the securing screws and remove the original screen (P1).
2. Place the supplied rubber rings onto the mounting points (P2).
3. Secure the MRA windscreen using the screws supplied and with the collars fitted (P3).
ATTENTION: Make sure you place the collars the correct way round over the
screws so that the screw caps can snap onto them.
4. Press the screw caps onto the collars (P4).
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: [email protected]
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
BMW R1200R -2014
Article No..
---
Torx 25, screwdriver PH 2
10792
10653
10876
10877
3
Required tools
