Assembly instructions
Rarely used fittings:
Select a pipe layout which prevents stagnant water (ring installation). If required, fit flush valves behind the fittings. If used after prolonged
operating pauses, allow water to drain (see recommendation of the Umweltbundesamt <Federal Environment Agency>).
Protection against Legionella:
If there is a risk of high Legionella concentrations, take other measures in accordance with DVGW work sheet W 551. Pay particular
attention to installations for persons with immune deficiencies.
Fittings for premixed water:
To prevent the risk of scalding, select appropriate operating temperatures for the hot water supply. If required, fit central thermostats.
Maintenance information:
In accordance with DIN 1988 the RV must undergo an annual function test.
The filters should be cleaned and, if required, descaled as specified in DIN 1988 Part 8 (for drinking water heaters) every 2 years.
Instructing the operator:
Instruct the operator in accordance with VDE 6023.
Assembly instructions
• Dimensions for trim set D-E-V and D-E-V ECO
• Accessories:
Shower head with spray regulator, item no. 01 815 06 99
5
