Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To ensure your coffee maker continues to make perfect coffee, you should occasionally de-scale the
mineral residue left by water using a de-scaling product specifically formulated for coffee maker. The
frequency of this operation will depend on the hardness of the water in your area and on how often you
use your coffee maker.
If you use it once or twice a day, use the following as a guide:
Soft water: every 6 months.
Mid-hard water: every 2 or 3 months.
Very hard water: every 6 or 8 weeks.
-
The mains voltage must match the rated voltage listed on the label on the base of the coffee maker.
- Use only cold water.
-
Do not allow the power cord to touch the warm-plate .
-
When making coffee again right away , turn the coffee maker off and let it cool down for 5 minutes.
Then fill it again with cold water .
-
The coffee in the carafe will be kept warm while the coffee maker is on.
-
Always unplug the coffee maker before cleaning it .
Keep the coffee maker out of the reach of children, as they are unaware of the hazards inherent in
-
electrical appliances.
-
To turn the coffee maker off, use the power switch. The pilot lamp will turn off, indicating that the
coffee maker is no longer in use.
Your coffee maker can use either the permanent filter with which it is equipped .
-
If the power connection is damaged, do not attempt to replace it.
Take the appliance to an authoritative Technical Service agent since operation could be hazardous. The
same applies for any other anomaly.
VOLTAGE : AC110V / 60HZ
POWER : 800 WATTS
CIRCUIT DIAGRAM
De-scaling
Attention!
Anomalies and repairs
P-7
Tabla de contenido
