Heathrow Scientific Mini Stirrer 1L Manual De Instrucciones página 6

Operation:
1. Remove the contents from the package, examining them carefully for
breakage, defects, or missing parts. Save the packaging.
2. Place Mini Stirrer on a sturdy, stable, level surface near a grounded
electrical outlet away from the edge of the counter and other moving
equipment. The surface should be clean. Allow sufficient clearance
on all sides of the unit for proper ventilation and usage. Make sure
the power cord is clear of hot surfaces and other hazards.
3. Place stir bar into bottom of empty container (see warning below).
4. Carefully fill container with all fluids to be mixed, note the level of
the liquid which will rise to accommodate the spinning vortex of
fluid when unit is powered. Be sure to leave sufficient room at the
container top for this rise in fluid level.
5. Center the mixing container on top of the stirrer, noting and verifying
the magnetic coupling of the stir-bar.
6. Turn control knob clockwise to turn on unit and continue steadily
turning until desired mixing speed is obtained.
7. Turn off unit before removing mixing container.
Warning!
Do not drop stir bars into empty glass containers as the container may
break.
Warning!
Do not plug other power supplies into stirrer unit, this will void warranty.
Warning!
Do not use if cord or power supply is damaged.
6