Installation
instructions
_-124"
MODELS ONLY:
DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET
_WARNING
- BEFORE PERFORMING
THIS
EXHAUST
INSTALLATION,
BE SURE
TO DISCONNECT
THE APPLIANCE
FROM
ITS ELECTRICAL
SUPPLY. PROTECT YOUR
HANDS
AND ARMS FROM SHARP
EDGES
WHEN WORKING
INSIDE THE CABINET. BE
SURE TO WEAR GLOVES.
For downward venting, rotate elbow
sections so that elbow points downward
REMOVE
DESIRED
KNOCKOUT
(ONLY1)
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
, Rotate elbow sections so that the opening points to the
side to which you want to vent. Preassemble 4" elbow with
4" duct. Use only 4" UL approved rigid metal for ducting
inside the dryer.
, Connect duct assembly to the internal elbow.
WAR NIN G- Se sure n ot topull ordamage
the
electrical wires inside the dryer when inserting the duct,
4" UL approved
rigid metal
i
DUCT
........
i..[ j ......
TAPE
, Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
AWARNING-
Internal duct joints must be
_
ecured with tope, otherwise
they may separate and cause
a safety hazard.
27" MODELS ONLY:
DRYER EXHAUST TO RIGHT, LEFT OR
BOTTOM CABINET
THIS
EXHAUST
INSTALLATION,
BE SURE
TO DISCONNECT
THE APPLIANCE
FROM
ITS ELECTRICAL SUPPLY. PROTECT YOUR
HANDS
AND ARMS
FROM SHARP EDGES
WHEN WORKING INSIDE THE CABINET. BE
SURE TO WEAR GLOVES.
For downward venting, rotate elbow
sections so_
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
, Rotate elbow sections so that the opening points to the
side to which you want to vent. Preassemble 4" elbow with
4" duct. Use only 4" UL approved rigid metal for ducting
inside the dryer.
* Connect duct assembly to the internal elbow.
,_ WAR NING-
Be sure not to pull or damage
the
electrical wires inside the dryer when inserting the duct.
, Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
AWARNING-
H
Internal
duct joints
must be
secured with tope, otherwise
they may separate and cause
a safety hazard.