Troubleshooting - A SYSTEMS DMP8800 Manual Del Usuario

DMP8800

TROUBLESHOOTING

My meters aren't working
Have you wired the input signals correctly? Is the input
selected as the input signal source? Have you activated
the channel? Have you set your input gains and levels
correctly? Is the matrix mixer section properly routed?
I don't have any output
Have you activated the output channels? Do you see a
signal in the output meters? Have you correctly routed
your inputs to channels, turned levels up, and unmuted
mixes? Have you applied an excessive compressor-
limiter to any input or output signals?
I have a signal, but it's really distorted!
Are any of the Clip LEDs lighting up for input or output
mixes? Do any of the signals on your entire audio chain
seem excessive? This could include input connectors,
channel inputs, matrix outputs�
My devices are not communicating via Ethernet
Are the red and green LEDs on the Ethernet connectors
lighting up? Are you using a decent quality Ethernet
cable? Do you have the Primary port of the first
device connected to the Secondary port of the second
DMP8800?
My DMP8800 won't communicate with my computer
Are you using a decent quality Ethernet cable? Are your
computer and DMP8800 both connected to the same
network? Do you have a firewall turned on?
17
English