Blackmagic Design Teranex Mini IP Video 12G Manual De Instalación Y Funcionamiento página 32

Remove
Removes the selected pushbutton.
Done
Click the Done button to exit the edit mode.
Using Pushbuttons
Adding and Editing Pushbuttons
Click on the settings icon and then select 'edit buttons'. Click on the add button and
choose whether to add a source or destination pushbutton, or click 'edit' to modify an
existing one.
The set button window appears and allows you to set the IP video source or
destination, control and the icon for the pushbutton.
The set button window allows icon customization
for sources and destination pushbuttons
Moving Pushbuttons
When editing or adding pushbuttons, you can also reposition them by clicking on the
respective button and dragging it to a new position.
Once you are satisfied with your changes, click 'done' to return the software to
standard routing.
Viewing and Switching Routes
Viewing Routes
In order to see which IP video source has been routed to a video destination, such as a
monitor, press the button in the destinations panel to make the button illuminate. The
associated video source button will illuminate in the sources panel, making it
immediately obvious which source is connected to the monitor.
Reveal Source
If you select a destination but the source is currently positioned offscreen, clicking the
reveal source button will scroll the sources area to display the source pushbutton.
Blackmagic Videohub Control 32 32