Inserting The Bobbin; Threading The Machine - Singer C240 Manual De Instrucciones

Inserting the Bobbin

Make sure that the needle is fully raised and the machine
is turned off before inserting or removing the bobbin.
1. Insert the bobbin in the bobbin case with the thread
running in a counterclockwise direction.
the thread at the arrow markings into the stitch plate
4. Pull the thread at the arrow markings into the stitch
5. To cut off excess thread pull thread back over the
6. Replace the bobbin cover.

Threading the Machine

Make sure that the presser foot is raised and the needle
is in its highest position.
appropriately sized spool cap.
to front. Pull the thread between the tension discs
3. Thread down through the right-hand threading slot
and then upwards through the left-hand threading
slot.
4. Bring the thread from the right into the take-up
5. Thread the needle.
C
E
12
B
D
1
B
3
D
C
E
G
2
A
4
F