Inserting The Bobbin - Singer 2263 Manual De Instrucciones

⚠
Turn power switch off before inserting or removing the bobbin.
2
10
11
B
13
The bobbin case must be properly seated into the holder or the machine will not sew. After
placing it into the holder and releasing the tab, if the bobbin case seems loose, if it falls to one side,
or if it is not pushed all the way in, remove it. Hold it by the latch and reinsert it until it is securely in
place.
Refer to illustration on base plate of machine.
GETTING READY TO SEW
1. Take off the removable storage compartment.
2. Open the hinged cover.
3. Pull the bobbin case latch to remove the bobbin case
from the bobbin holder.
4. Hold the bobbin case in one hand, then insert the
bobbin so that the thread runs clockwise, as shown in
the illustration.
5. First, bring the thread into the small slit (A) on the
side of the bobbin case. Then, bring it underneath
A
the metal guide, continuing until it is comes out of the
opening at the bottom of the metal guide. You should
feel it and hear it click in place. If it does not click in
place, the machine will not sew. After clicking the
thread in place, pull the thread in the direction shown
(B).
6. Once the bobbin has been placed in the bobbin case,
hold the bobbin case by the latch so that the latch is
pointing toward you.
7. Insert into the bobbin case holder so that the metal
extension is positioned at 12 o'clock. You should feel
the bobbin case become seated securely in place.
Release the latch.

Inserting the Bobbin

2
13