Tabla de contenido
Resetting Smart Codes
The Plato Transmitter and Receiver are set
to same frequency during manufacturing.
Should the Smart Code frequency need to be
reset do the following:
(1) Press the Power button on Receiver
5 times until the LED indicator 1 on the
Receiver flashes continuously.
(2) Press the shutter button on the Transmitter
one time to confirm the code. When the LED
indicator 1 goes out, the Receiver can be
controlled by the Transmitter. The Smart Code
has been set successfully.
(3) You can do it to unlimited receivers with
one transmitter. One transmitter can trigger
unlimited receivers for unlimited cameras
even with different brands. One transmitter
En
will operate up to 16,000,000 receivers
without interference by someone who uses
another Plato transmitter.
Tips:
1. Turn off the camera before inserting the
connecting cable. Do not install or uninstall
the Receiver with the camera powering on.
2. Make sure the connecting cable is firmly
inserted into the camera.
INSTRUCTION MANUAL
7
Tabla de contenido
