Tabla de contenido
Bulb Mode
1. Set the Plato Transmitter to the B position.
2. Set the Camera to "B" Bulb position.
3. Half-pressing the Transmitter shutter
button will focus. The LED indicator 1 and 2
on the Transmitter will light green.
4. Fully pressing the shutter button, camera
will operate on B mode (the LED indicators on
the Transmitter and Receiver will light red).
5. To end B mode, fully press the shutter
button again.
6
Using the Plato Transmitter as a
Wired Remote without Receiver
The Plato Transmitter can be used as a
wired remote control with batteries in the
Transmitter.
1. Connect the Phottix accessory cable to the
camera shutter port.
2. Connect the other end to the Transmitter
cable port.
3. Turn the Plato Transmitter and camera
power on.
It has all the functions (Single shooting/2
Seconds Delay/ Continuous Shooting / Long
Exposure) as above.
Tabla de contenido
