Speck Badu Jet IMPERIAL Manual De Instalación página 12

Jet Housing Installation - New Concrete or Gunite Construction - continued
Concrete pool with vinyl liner:
n
Use the provided mounting template (small scale
version of template shown in Figure 5) to mark and drill
the holes through the liner (twelve (12) M8 clamping
ring screw holes and 13.3" center hole). Insert the
gasket with knobs in the front of the jet housing (part
#26). Install the liner with the holes aligned to the
jet housing. Align the clamping ring (part #28) and
stainless steel handles (part #70) as shown in Figure
7. Place the clamping ring gasket (part #27) behind
the stainless steel handles and install using the
twelve (12) M8 x 30 clamping ring screws (part #52).
(See Figure 8)
n Tiled pool:
The tile thickness may be compensated with an
additional clamping ring and longer clamping screws
(optional parts). (See Figure 9)
Figure 8
Installation for concrete pool with a vinyl liner
Figure 9
Installation for a tile pool
12
1
30
31
1
26
1
30
1
26
(1)
Figure 7
Aligning Clamping Ring with Stainless Steel Handles
33
32
Liner
27
70
33
31
32
28
70
28
(1)
(1)
(1)
28
52
52