LD Systems LD LAX8D Manual De Usuario página 11

17 PWR-LED (POWER)
This LED indicates when the Power is on in your mixer.
18
BIT DIGITAL EFFECTS
Displays the selected preset.
19 PRESETS SELECTOR
Adjust this knob to select the right effect you wish to perform. There is a total of 100 presets available: Echo,
Vocal, Plate and versatile two-effect combination. When you found the right preset, please push this knob to
confirm this selection.
20 PEAK/MUTE-LED
This LED lights up when the input signal is too strong. In case of the digital effect module being muted, this
LED also lights up.
21
DFX MUTE-TASTE
This switch is used to activate/deactivate the effect facility. Sometimes, you can also use the DFX FOOT
SWITCH for convenient operation.
22 STEREO AUX RETURNS
Use these stereo 1/4" sockets to return the sound of an effect unit to the main mix. You can also use them as
extra auxiliary inputs, but they are primarily used to connect the output of external effect processors. Note:
The AUX RETURN2 (DFX) is connected with the output of the internal digital effects, but, this signal flow will
be broken, if you have any external signal inserted from these 2 sockets of AUX RETURN2.
STEREO AUX RETURNS
1
2
22
LEFT(MONO)
LEFT
RIGHT RIGHT
24
FOOT SW
AUX SENDS
This socket is used to connect external footswitch for a convenient operation, it has the
1
same function as the DFX MUTE button.
23
25 PHONES
2
This socket will be used to send out the mix signal to a pair of headphones.
23 AUX SENDS
These 1/4" sockets are used to send out the signal from the
AUX bus to external devices such as effects and sound
processors, they also can be used as monitoring outputs by
connecting a power amplifier and monitor speaker.
CONTROL ELEMENTS:
11