Safety Warnings
2
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and
others.
All safety messages will follow the safety alert symbol and either the
word "DANGER" or "WARNING". These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what can happen if the instructions are not
followed.
WARNING:
To reduce the risk of fire, electric shock, or injury when using your
freezer, follow these basic precautions:
Do not remove the ground wire.
Connect the ground wire to an
effective ground.
Do not use an adapter (
Do not use an extension cord.
Disconnect power before servicing
or cleaning the product.
After cleaning or servicing, replace
all components before turning the
product on.
Suffocation Hazard
Remove doors from your old
freezer.
Failure to do so can result in
death or severe injuries.
FREEZER SAFETY
IMPORTANT SAFETY INSTRUCTIONS
*
pg. 3
).
KEEP THESE INSTRUCTIONS IN MIND
Proper disposal of your old freezer
You can be killed or seriously injured if
you dont immediately follow instructions.
You can be killed or seriously injured if
you dont follow instructions.
Use non-flammable cleaning products.
Keep flammable materials such as
gasoline away from the freezer.
Use two or more people to move and
install the freezer.
This appliance must not be used by
people with reduced physical, sensorial or
mental capacity (including children) or who
lack knowledge or experience unless they
are supervised or instructed by the person
responsible for their safety.
Junked or abandoned freezers are
still dangerous especially for children
as they may get stuck inside the
product, running the risk of
suffocation.
Proper disposal of this product(s)
avoids negative consequences to the
environment and to your health.
The product should not be treated as
E