Festool RTSC 400 Li Manual De Instrucciones página 8

English
Do not use the power tool if the switch
b.
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Disconnect the plug from the power
c.
source and/or remove the battery pack, if
detachable, from the power tool before
making any adjustments, changing acces­
sories, or storing power tools. Such pre­
ventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
d.
children and do not allow persons unfami­
liar with the power tool or these instruc­
tions to operate the power tool. Power
tools are dangerous in the hands of un­
trained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of mov­
ing parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Prop­
f.
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
Use the power tool, accessories and tool
g.
bits etc. in accordance with these instruc­
tions, taking into account the working con­
ditions and the work to be performed. Use
of the power tool for operations different
from those intended could result in a haz­
ardous situation.
Keep handles and grasping surfaces dry,
h.
clean and free from oil and grease. Slip­
pery handles and grasping surfaces do not
allow for safe handling and control of the
tool in unexpected situations.
5 Battery tool use and care
a. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b. Use power tools only with specifically des­
ignated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it
c.
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con­
8
nection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa­
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that is
damaged or modified. Damaged or modi­
fied batteries may exhibit unpredictable be­
haviour resulting in fire, explosion or risk of
injury.
Do not expose a battery pack or tool to fire
f.
or excessive temperature. Exposure to fire
or temperature above 130 °C (265 °F) may
cause explosion.
Follow all charging instructions and do not
g.
charge the battery pack or tool outside the
temperature range specified in the in­
structions. Charging improperly or at tem­
peratures outside the specified range may
damage the battery and increase the risk of
fire.
6 SERVICE
a. Have your power tool serviced by a quali­
fied repair person using only identical re­
placement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs.
b.
Service of battery packs should only be
performed by the manufacturer or author­
ized service providers.
Only use original Festool parts for repair
c.
and maintenance. The use of incompatible
accessories or spare parts can result in
electric shocks or other injuries.
3.1 Machine-related safety instructions
Dust that is harmful to your health may be
–
produced as you work (e.g. paint products
containing lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Observe the safety
regulations that apply in your country.
Wear a P2 respiratory mask to protect
your health. In enclosed spaces, ensure
that there is sufficient ventilation and
connect an extraction system.
Always wear protective goggles to pro­
tect against sanding hazards.