Stihl MSA 120 C Manual De Instrucciones página 82

English
► Plunge the guide bar into the felling cut until it is visible at
the other side of the trunk, @ 12.4.5.
► Apply the spiked bumper behind the hinge and use it as a
pivot.
► Enlarge felling cut in direction of hinge.
► Enlarge felling cut in direction of stabilizing strap.
► Insert a felling wedge. The felling wedge must match the
tree diameter and the width of the felling cut.
► Shout a warning.
► With outstretched arms, cut through the stabilizing strap
horizontally from outside at the same level as the felling
cut.
The tree falls.
80
12.4.8 Felling normal, large diameter tree
A normal tree is felled with a felling cut and stabilizing strap.
1.
This felling cut must be performed if the tree diameter is
2.
greater than the guide bar's length.
► Shout a warning.
1
► Apply the spiked bumper at the same height as the felling
cut and use it as a pivot.
► Hold the saw horizontally and swing it into the felling cut
3
as far as possible.
► Enlarge felling cut in direction of hinge.
► Enlarge felling cut in direction of stabilizing strap.
► Move to the other side of the tree.
► Plunge the guide bar into the felling cut at the same
height.
► Enlarge felling cut in direction of hinge.
► Enlarge felling cut in direction of stabilizing strap.
2
3
12 Operating the Saw
4
5
6
0458-716-9821-D