Handset Operation; Outgoing Calls; Incoming Calls; Activate/Deactivate Hands Free Function - Topcom BUTLER 2920 Serie Manual De Usuario

Topcom Butler 2920

5. HANDSET OPERATION

5.1 OUTGOING CALLS

5.1.1 Making a phone call
• Press the Line button
• Enter the desired telephone number.
• Press the Line button
5.1.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be corrected by means of the Mute
you haven't pressed a button for 10 seconds, the number you've already entered will disappear and the handset
returns to standby mode.
• Press the Line button
• Press the Line button
5.1.3 Redialling the last number dialled
• Press the Line key
• The Line/Charge indicator
• You will hear the dial tone.
• Press the Redial key
5.1.4 Redial one of the last 5 numbers dialled
• Press the Redial key
5 numbers dialled, press the Redial key
• Press the Line key
• The number shown on the display is dialled automatically.
• After finishing your call, press the Line key

5.2 INCOMING CALLS

• When a call comes in, the handset will start to ring. The
• Press the Line button

5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are on the phone, press the
Hands free key to activate the hands free function.
Press the same button
Note : When you are calling in hands free mode and you want to change the volume, press the Volume
button.
Attention !! When you use the hands free function for a long time, the batteries will be empty more
quickly!!

5.4 PROGRAMMING MEMORY NUMBERS

You can program 10 indirect numbers (of max. 25 digits) in the phone's memory.
• Press and hold the Memory button
• Enter the telephone number you whish to store.
• Press the Memory button
• Enter the memory location (0-9) where you want to store the number.
• You will hear a confirmation tone and the
Remarks :
If you wish to insert a pause, press the Redial/Pause button
of 3 sec.
Topcom Butler 2920
. You will hear the dial tone.
when you want to terminate the call.
. The number will be dialled automatically.
when you want to terminate the call.
.
(LED) on the base unit will blink.
. The number you last called is dialled automatically.
. The number you last called appears on the display. If you would like to dial one of the last
a few times until the desired number appears on the display.
.
to hang up.
to answer the incoming call.
to deactivate the hands free function.
until the
again to confirm.
-icon will disappear.
LED on the base will blink.
-icon appears on the display.
on the location where you want a pause
/P
button . When
9