SEVERIN KS9827 Instrucciones De Uso página 15

persists, disconnect the appliance from the mains power and contact our Customer Service
Department.
Problem
The appliance is not working
at all.
The normal operating sound
changes or becomes louder.
Transporting the appliance
The unit must only be transported in its vertical position.
Do not tilt it any more than 45°.
During transport, ensure that the unit is properly secured and protected against shock, vibration and
shifting.
To ensure optimum performance, wait a minimum of 2 hours after transporting the unit before
connecting it to the mains.
Disposal
This appliance has been manufactured from recyclable materials. After removing the plug
from the wall socket, the unit should be rendered unusable by cutting off the power cord
before disposing of it through special waste collection points in accordance with local
regulations. The refrigerant and the chemical agent in the insulation foam must be disposed of
through a competent agency. Take special care not to damage the cooling circuit before the unit is
handed over for such disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two years
from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace
any parts found to be defective, providing the product is returned to one of our authorised service
centres. This guarantee is only valid if the appliance has been used in accordance with the
instructions, and provided that it has not been modified, repaired or interfered with by any
unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic
items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may
have as a consumer under applicable national legislation governing the purchase of goods. If the
product fails to operate and needs to be returned, pack it carefully, enclosing your name and address
and the reason for return. If within the guarantee period, please also provide the guarantee card and
proof of purchase.
Possible cause and solution
– There is a power failure
– The main fuse has blown.
– The temperature control is set to '1'.
– The fuse in the wall socket (if applicable) has blown. This can
be checked by connecting another electrical device to the
socket and checking for function.
– Check for proper positioning (uneven floor?).
– Are any adjacent objects affected by the running of the cooling
unit (i.e. causing them to vibrate?)
– Are there any objects on top of the unit which might be
vibrating?
15