Using The Easy Interactive Function; Attaching A Security Cable - Epson BrightLink 455Wi+ Guia De Instalacion

Warning
❏
Never loosen the bolts and nuts after installation. Confirm that the screws have not
become loose on a regular basis. If you find any loose screws, tighten them firmly. If the
screws are not tightened firmly, the projector or setting plate may fall and cause personal
injury or property damage.
❏
Do not hang on the setting plate or hang a heavy object on the setting plate. If the
projector or setting plate falls, it could cause personal injury or property damage.
8. Appendix

Using the Easy Interactive Function

After you install the projector, you need to install the Easy Interactive Driver and perform calibration (to align
the positions of the cursor and Easy Interactive Pen).
For details, refer to the supplied Quick Guide or the User's Guide on the BrightLink 455Wi+ CD-ROM.

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire of the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
After installation of the projector is complete, make sure you leave the pen, remote control,
batteries, software CDs, and Quick Guide in the room with the projector.
26