Motorola MBP43S Guia De Inicio Rapido

MODELS:
MBP43S
MBP43S-2
MBP43S-3
MBP43S-4
WARNING:
Strangulation Hazard. Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adapters. Only use the
AC Adapters provided.
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide.
1. Setting up your Digital Video Baby Monitor
A. Baby Unit Power Supply
• Connect the DC plug
DC JACK
• Only use the supplied
• Slide the ON/OFF
DC PLUG
C. Fastening the battery cover of the Parent Unit
• Place the battery
compartment cover over
the battery, making sure
that the battery wires are
carefully pushed down and
the cover fits properly.
• Gently tighten the screw in
a clockwise direction using
a small cross head or flat
end screwdriver.
B. Parent Unit Battery Installation
of the power adapter
to the DC jack at the
bottom of the Baby
Unit and the other end
to the electrical outlet.
Black Red
power adapter (5V
DC/1000mA).
switch to the ON
position.
D. Parent Unit Power Supply
• A rechargeable battery pack is supplied
and should be fitted, so that the Parent
Unit can be moved without losing the
link and picture from the Baby Unit(s).
• Charge the battery in the Parent Unit
before you use it for the first time or
when the Parent Unit indicates that
battery is low.
• Insert the wire tabs of the rechargeable
battery pack into the contact slots as
shown and fit the battery pack into the
compartment.
• Connect the small plug of the power
adapter to the Parent Unit and the other
Micro USB Socket
end to the electrical outlet.
• Only use the supplied power adapter
(5V DC / 600mA) with the micro-USB
style plug.
• Charge for at least 12 hours before first
use.
Micro USB Plug
US EN