Insignia NS-H3005 Guia Del Usuario página 24

At the end of the recording, the home theater
system stops recording and shuts off.
Note
• While the Instant Timer Recording is active,
you cannot change the channel on the home
theater system.
• To stop the recording, press STOP or POWER
twice.
INSTANT TI MER RECORD
CHANNEL 2
SPEED SP
START NOW
LENGTH 0H30M
Checking the recording time
To check the recording time:
• Press once to check the recording time.
Extending the recording time
To extend the recording time:
• Press to extend the recording time.
Subsequent presses result in advancing the
recording time by 30-minute increments.
Note
• If you press while in Instant Timer Recording mode, the
home theater system enters the Recording Pause mode.
Instant timer recording is cancelled.
• If the home theater system is set to 0H00M, the home
theater system changes to Normal Recording mode.
Dubbing and editing
If you want to edit or dub your camcorder or VCR
recordings to this home theater system, the back
(or front) panel mounted audio and video (A/V)
input jacks make the connections quick and
easy. These direct A/V jacks also provide better
picture results than using the RF jack on the
back panel.
To dub or edit a recording:
1 Connect the camcorder's or VCR's A/V
outputs to your home theater system as
illustrated in "Connecting devices to your
home theater system" on page 10.
2 Press INPUT to set the input channel to
LINE2 if you have connected your camcorder
or VCR to the front A/V jacks.
-OR-
Press INPUT twice to set the input channel to
LINE1 if you have connected your camcorder
or VCR to the A/V input jacks on the back of
home theater system.
3 Play the tape in the camcorder (or another
VCR). If you have a television attached to
your home theater system, you can see the
video playing.
4 When you want to start recording, press the
home theater system's
Note
• Before recording, confirm the recording start position.
• To stop the dubbing, press
22
0H30M ..... 9H00M 0H00M
L ength D isplay
Length Display—each additional
( each additional press of
press of increases the recording
time by 30 minutes.
REC/ITR ( ) increases recording
time 30 minutes )
once to start.
twice.
www.insignia-products.com
Insignia NS-H3005 Home Theater System
Copying from DVD to VCR
This home theater system is capable of copying
the contents of a DVD to a VHS tape.
Note
If the DVD you are attempting to copy is copy protected, you
cannot copy the DVD. It is not permitted to copy Macrovision
encoded DVDs. LOCK is displayed if you try to copy a
Macrovision encoded DVD.
To copy from a DVD to a VHS tape:
1 Insert the DVD you want to copy in the DVD
player and close the disc tray.
2 Insert a blank tape into the VCR.
3 Press on the front panel or remote control.
The DVD starts to play. If the DVD menu
appears, you may need to press
start playing the DVD.
4 Press on the front panel or remote control.
The home theater system goes into Record
mode and the COPY indicator lights.
5 Press or POWER twice to end copying
when the DVD is finished playing.
Note
• When you stop the DVD playback during copying, VCR
Recording mode also stops automatically.
• You must stop the copy process manually when the DVD
movie ends or the home theater system may replay and
record over and over again.
VHS Hi-Fi stereo system or MTS broadcast
This home theater system is equipped with the
VHS Hi-Fi audio sound system for recording and
playback. The following information gives a brief
description of Hi-Fi audio and how to record and
play a tape in the Hi-Fi Audio mode.
To setup the VCR for Hi-Fi Audio mode:
1 Press MENU. The Main menu appears.
2 Press or
MEMORY/ENTER. The Setup menu
appears.
3 Press or
the Setup menu.
4 Press or
option to Hi-Fi.
5 Press or
6 Press or
option to STEREO.
(STEREO) POSITION: The left channel
sound (L) is heard from the left speaker and
the right channel sound (R) is heard from the
right speaker.
(LEFT) POSITION: The left channel sound
(L) is heard from both speakers.
again to
to select SETUP, then press
to choose AUDIO MODE on
to set the AUDIO MODE
to choose AUDIO OUTPUT.
to set the AUDIO OUTPUT