Deleting A Preset Position (Del) - Panasonic WV-CW960/G Instrucciones De Operación

● Auto Focus (AF MODE)
1. Move the cursor to AF MODE, and then tilt the joystick
left or right to select an auto-focus function setting.
MANUAL S.M.L : Auto focus does not operate
after moving to a preset position.
AUTO S.M.L : Auto
moving to a preset position.
● Sequence/Sort DWELL Time (DWELL TIME)
This section explains how to set the length of time the
camera stops (time it stops rotating) and tapes the
scene while in the various preset positions for the
sequence and sort operations (page 33).
1. Move the cursor to DWELL TIME, and then tilt the
joystick left or right to select a DWELL time setting.
Tilting the joystick cycles through the stop time display
in the sequence shown below. (unit: sec, min)
2S ↔ 3S ↔ 5S ↔ 10S ↔ 30S ↔ 1MIN
4MIN ↔ 3MIN ↔ 2MIN
PRESET NO.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
● Scene File Setting (SCENE FILE)
Up to 10 scene files, each of which contains camera
settings for a specific location (scene), can be stored
in memory. Scene files are managed using scene file
numbers from 1 through 10, and can be selected when
configuring preset position settings.
The following procedures explain how to select a
scene file and how to configure scene file settings.
(1) Selecting a Scene File
Use this procedure when you want to apply the
settings of a previously stored scene file when you are
configuring the settings of a preset position.
1. Move the cursor to SCENE FILE, and then tilt it left
and right to select the number of the scene file you
want to select.
PRESET NO.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
(2) Configuring Scene File Settings
1. Move the cursor to SCENE FILE, and then tilt it left
and right to select the number of the scene file
whose settings you want to configure.
focus operates after
1*
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
1*
ON
ALC
MANUAL L
10S
1
••••••I255
L H
SHUTTER
AGC
SENS UP
WHITE BAL
MOTION DET
RET TOP
2. Press the CAM (SET) button.
This will display the scene file setting menu.
The following items can be set on the Scene file
settings menu. See camera settings for details on
each setting.
• SHUTTER (page 27)
• AGC (page 27)
• SENS UP (page 27)
• WHITE BAL (pages 28, 29)
• MOTION DET (page 39)
● Preset Speed Setting (PRESET SPEED)
Set the speed the camera moves to the various preset
positions for the sequence and sort operations (page
33).
1. Move the cursor to PRESET SPEED, and then tilt the
joystick left or right to change the speed setting.
Shifting the setting towards the L side decreases the
speed, while shifting towards the H side increase it.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
● Deleting a Preset Position (DEL)
1. Move the cursor to DEL, and then press the CAM
(SET) button.
This deletes the contents of the currently selected
position number and displays the position selection
menu.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
**PRESET POSITION**
1
5*
9*
13*
17*
21*
25*
29*
ID:DOOR
033-064 225-256
RET TOP
-32-
**SCENE FILE 1**
OFF
ON(MID)
OFF
ATW1
OFF
PRESET NO. 1*
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
PRESET NO. 1*
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
2* 3* 4*
6* 7* 8*
10* 11* 12*
14*
15*
16*
18* 19* 20*
22* 23* 24*
26* 27* 28*
30* 31* 32*