Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Bedienung
1. Use the designated power supply unit
the power circuit.
The charge level indicator
green. This tells you that the charger is ready for operation.
2. Now insert one or two rechargeable li-ion batteries in the battery com-
partments
3
Note: Ensure the polarity is correct by checking the symbols (+ and -)
in the battery compartments; the charge level indicator will flash red if
batteries are inserted incorrectly.
3. The charge level indicator will light up red if the batteries are charging.
4. It will change to green once the battery is charged.
Changing the adapter plug
Use the appropriate power supply unit adapter plug for your region –
EU, USA or UK.
1. Press the disengage button
it down.
2. Turn the adapter plug
until the adapter plug is disengaged.
3. Remove the adapter plug
4. Place the required adapter plug on the mount surface, press it down and
lock by turning in the direction of the arrow pointing to „LOCK".
5. The disengage knob
1
first flashes red briefly and then lights up
as required.
R
G
R
on the side of the adapter plug and hold
6
in the direction of the arrow pointing to „OPEN"
4
.
4
will slide back into position.
6
5
to connect the charger
EN
2
to
11
Tabla de contenido
