Brewing; Brewing Coffee With Coffee Beans - Beem Fresh-Aroma-Perfect Deluxe Manual De Instrucciones

Brewing

Brewing
EN

Brewing coffee with coffee beans

58
NOTE
When the appliance is operating, the insulated flask (7) has
►
to be located below the filter compartment (10) and the lid
of the insulated flask has to be placed correctly. The lid of
the insulated flask presses the drip protection (9) upwards,
and the coffee can flow from the filter through the lid into the
insulated flask.
When the brewing process has been completed, the
►
appliance is switched off automatically.
NOTE
Activate the display lighting by pressing any key. The
►
lighting goes out 60 seconds after the last button was
pressed.
Fill the water tank with water as described in the section
‹
Filling with water.
Fill the appliance with coffee as described in the section
‹
Filling with coffee beans.
Place the filter as described in the chapter titled
‹
filter.
Select the desired number of cups as described in the section
‹
Setting the number of cups.
Set the desired strength of coffee as described in the section
‹
Setting the coffee.
Set the grinding fineness as described in the section
‹
the grinding fineness.
Press the "On/Off" button (19) to switch the grinder on.
‹
The indicator lamp (18) is lit; the freshly ground coffee powder is
passed through the shaft of the grinder into the filter compartment
(10), and the coffee is brewed.
Placing the
BEEM - Elements of Lifestyle
Setting