LG SIGNATURE LSR100 Manual Del Usuario página 19

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION
• When tilting the appliance backward to loosen
the screen at the bottom of the appliance, two
or more people should hold the handles at the
bottom and rear top side of the appliance.
[Method2]
With the refrigerator door open, fit the spanner
type2 in the nut of the height adjustment screw,
and turn until it is level.
Raise the door
Lower the door
NOTE
• Support the bottom of the appliance once the
height adjustment screws on both sides of the
bottom have been completely loosened. This
way you can prevent the door from slanting
downward due to the weight of stored food
items.
Door Mullion and Auto Open Door
Once the door baskets are filled, the doors may
become misaligned, preventing the door mullion
or the Auto Open Door function from working
properly.
If the mullion on the left refrigerator door does
not open and close properly or the right door
stays ajar after the Auto Open Door function,
follow the directions below.
1
Make sure both front leveling legs are
extended fully and in firm contact with the
floor.
2
Follow the instructions in the Door Alignment
section to raise the left refrigerator door
until the door mullion is once again working
properly.
3
Adjust the right refrigerator door so it aligns
with the left refrigerator door.
EN
19
Tabla de contenido

Solución de problemas

loading

Tabla de contenido