The display window shows the estimated time remaining in the cycle after you have
pressed the Start/Pause button. The estimated time remaining may fluctuate as the
cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete. When your dryer is
in the cooPdown phase, the Cooling light will illuminate. When your dryer is in the wrinkle
prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, "END" appears in the display panel until you open the dryer
door, press the Power, Close, or Start button, or 5 minutes have passed.
If your dryer is paused during a cycle, the indicator lights will blink until the Start/Pause
button is pressed.
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press
Level button repeatedly to scroll through the dry level settings. An indicator
light illuminates next to each dryness bvel as you scroll through. Stop at your desired
dryness level. Larger or bulkier loads may require the Very Dry or More Dry setting for
complete dryness. Damp Dry is designed to partially dry items. Use for items that by flat
or hang to dry.
setting as you scroll tN'ough. Stop at your desired temperature setting.
High - For sturdy cottons or those labeled Tumbb Dry.
Medium - For permanent press, synthetics, lightweight cottons, or items labeled
Tumble Dry Medium.
Low - For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low - Provides the lowest heated dry temperature possible.
When using Manual Dry cycbs, you can adjust the time by pressing the Time Selection
button.
During the Sensory Dry cycle, the time light indicator is off because exact drying times
are determined by fluctuating humidity levels.
Press to pause and restart programs.
Press once to turn your dryer on. Press again to turn it off. If you turn your dryer on and
do not touch any buttons for 10 minutes, the power automatically turns off.
English ° 23
DV3614000E((
) 030641)
0OENlS0416indd
Sec5:23