Source Menu; Pc Mode - Oki V40A-PHS Instrucciones De Manejo

Channel
Channel can be changed by " " / " " button or Digit
Buttons.
Colour System

By pressing /

Press " " / " " button to change the colour system
to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not available for
the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Sound System

By pressing /

Press " " / " " button to change the sound system
to BG, I, L, L', DK.
Fine Tune

By pressing / button, select Fine Tune. Press

" " / " " button to adjust the tuning.
Search

By pressing / button, select Search. Press " "

/ " " button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
Store

By pressing /

" "or "OK" button to store the adjustments. "Stored..."
will be displayed on the screen.
Install menu in AV modes
The following screen appears in the install menu:
INSTALL
Colour System
VCR
Store
Colour System

By pressing / select Colour System. By press-

ing " " / " " button, you can change the colour
button, select Colour System.
button, select Sound System.
button, select Store. Press
system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC
3,58 or AUTO.
VCR
By pressing
" " button, you can set the VCR to ON or OFF. .
Store
By pressing
" "or "OK" button to store the adjustments. "Stored..."
will be displayed on the screen.

Source menu

By pressing " " / " " button, select the fifth icon.
Source menu appears on the screen.
SOURCE
TV
DTV
EXT-1
EXT-2
FAV
In source menu, highlight a source by pressing

button and switch to that mode by pressing " "
or "OK" button. Source options are; TV, DTV, EXT-1,
EXT-2, FAV, HDMI, YPBPR and PC.
Note: You can mark desired source options by press-
ing OK button. Therefore, when
only the marked source options will be available.

PC Mode

Installation
• Power off both Computer and Display before making
any connections.
• Set your PC's resolution correctly before connect-
ing to the TV. See the table on Appendix page.
• Use 15-pin display cable to connect a PC to the LCD
TV.
Note: PC menu will not be active for TV sets without
a PC input.
English - 48 -

/ select VCR. By pressing " " /


/ button, select Store. Press

AV
/

button is pressed,