Setting Up The Concentrator; Setting Up The Humidifier - Invacare Perfecto2 Serie Manual Del Usuario

Invacare® Perfecto₂™Series
You may select a room in your house where using your oxygen
concentrator would be most convenient. Your concentrator can be
easily rolled from room to room on its casters.
Your oxygen concentrator will perform best when operated under
the conditions outlined in typical product parameters.
Usage in environments other than those described may result in the
need for increased equipment maintenance. The air intake of the
unit should be located in a well ventilated area to avoid airborne
pollutants and/or fumes.

6.3 Setting Up the Concentrator

1. Plug in power cord to an electrical outlet.
2. Connect Humidifier (if so prescribed).
18

6.3.1 Setting Up the Humidifier

WARNING!
Risk of Injury or Damage
To avoid burns from steam or hot water, inhalation of
water and/or water damage to the concentrator:
– DO NOT fill humidifier bottle with hot water. Allow
boiled water to cool to room temperature before
filling.
– DO NOT overfill humidifier.
– Replace the humidifier cap and securely tighten.
Confirm that the cap is not cross-threaded on the
humidifier bottle.
– DO NOT reverse the oxygen input and output
connections. Water from the humidifier bottle will
travel through the cannula back to the patient if input
and output connections are reversed.
– When using tubing connections longer than 2.1 m
(7 feet) in length, position the humidifier as close
to the patient as possible to allow for maximum
humidification output.
1163146-H~07