10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
A DISC is caught inside the CD deck and
is not ejected.
ERROR 3
A DISC cannot be played due to
scratches, etc.
ERROR 6
A DISC is loaded upside-down inside the
CD deck and does not play.
ERROR 2
A DISC inside the CD changer is not
loaded.
ERROR 3
A DISC inside the CD changer cannot be
played due to scratches, etc.
ERROR 6
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
ERROR H
Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically.
ERROR 2
An MD inside the MD changer is not
loaded.
ERROR 3
An MD inside the MD changer cannot be
played due to scratches, etc.
ERROR 6
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
30
DXZ835MP
Cause
Measure
This is a failure of CD deck's mechanism
and consult your store of purchase.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it properly.
This is a failure of CD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
This is a failure of MD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.