Promax TV Explorer HD Manual De Usuario página 205

USER'S MANUAL. TV EXPLORER HD / HD
If it is a digital television signal (DTV) on screen appears, for about some seconds,
the following parameters:
The top data box shows the tuned CHANNEL data: number or satellite name,
frequency, active channel plan and satellite downlink frequency.
The following data box shows the VIDEO data: type of video coding (MPEG-2 or
MPEG-4), video bit rate, profile and level with its resolution and aspect ratio, video
program identifier (VPID) and the TS identifier (TSID).
Next data box contains AUDIO information: type of audio coding (MPEG-1,
MPEG-2, AAC or DD), audio bit rate, audio program identifier (APID) and language (e.g.
spa).
The last box located in the same column shows the NETWORK data: network
name and/or satellite orbital position, service name, network identifier (NID) and service
identifier (SID).
On the left column appears the type of DVB signal, a window showing the signal
decoded and finally a data box stating if the emission is encrypted or free (SCRAMB or
FREE), when the service supports interactive TV (MHP, i.e. Multimedia Home Platform)
and when is inserted a CAM module into the TV EXPLORER
(CAM) appears.
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector
OSD:ON.
05/2011
LE
Figure 66.- Digital channel monitoring.
[6] key will appear the tuning information
HD / HD the indication
LE
[6] key must
[1] to switch to
Page 89