Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Parts description
1. Small grid
3. Heating element
5. Main grid
7. Thermostat knob
9. Base housing
11. Shelving plate
Electric connection
Before you plug the power plug into the power outlet, ensure that
the mains voltage corresponds with that of the appliance. You can
find information about this on the rating plate. Only connect the
appliance to a properly installed earthed socket.
Assembling the unit
1. Remove any packaging material that may be present.
2. Clean the grids and tray with a moist cloth.
3. Attach the four tube feet (12) one by one on the lower stand
tubes.
4. Attach the middle tubes connector on top and fit them on shelving
plate (11).
5. Attach the upper four tubes (10) on the middle tube connector.
6. Attach the base housing (9) on the upper side of the stand tubes.
7. Fit the side tables (4), fat collector tray (8) and the heating element
(3).
8. Fit the wind shield (2) and the main and small grid (5 & 1).
9. Your appliance is now ready to use.
Instructions for use
2. Wind shield
4. Side table
6. Indicator light
8. Fat collector tray
10. Stand tube
12. Tube feet
English
5
Tabla de contenido
