Midland BIKE GUARDIAN Manual Del Propietário página 16

Adhesive support
1. Before attaching the adhesive support, carefully clean
the surface where it will be applied.
1. Fix the camera to the adhesive support (flat or curved,
depending on the surface).
Recording / operating modes
On the rear side of the camera there are two selectors
suitable to set the resolution and the operating mode.
BIKE GUARDIAN can work either as a DVR or as an
action cam.
DVR mode: the camera automatically starts re-
cording when it's powered and stops recording
when the power is switched off. When the mi-
croSD card is full, BIKE GUARDIAN continues
recording by deleting the older files.
Actioncam mode: the camera manually starts and
stops recording. When the microSD card is full,
BIKE GUARDIAN will stop recording.
The chart here below summarises the two different modes:
DVR mode
Actioncam mode
In both modes, the camera will split the recordings in 5-minute files.
Start/Stop
Start/Stop recording at the tur-
ning on/off of the motorbike
Recording will start/stop ma-
nually
14
Recording
Loop recording: when the me-
mory is full the oldest files will be
overwritten
Recording will stop when the
memory is full