Daewoo DTC-110 Manual De Instrucciones página 6

ENG
OPERATION
1. Preparation
1.1 Connect the line plugs into phone line jack and the other plug to connect to the wall jack.
1.2 Insert the handset coil cord into the phone jack at the bottom.
2. Receiving
As it rings, pick up the handset from the cradle to answer, and put back the handset to hang up
to end the conversation.
3. Dialing
Pick up the handset, dial the desired number as hearing the dialing tone, then if you hear the
long tone like "do—do", the line has got through. If you hear the short tone like "do... do... do",
busy tone, you could press the hook switch then press REDIAL to dial it out again after some
time. You could repeat the above process till getting the line through.
4. Redial
Pick up the handset, press the REDIAL button, the unit will redial the last dialed number
automatically.
5. Flash
The fl ash time is 100ms; the fl ash function is available working in special exchanger.
6. Mute
When making a phone call, if you need a temporal talk with someone else and you don't want
the phone receiver hear your voice, press and hold MUTE key to hold the line and keep the
conversation at your side. And if you want to return to conversation, release the MUTE key.
7. Ringer volume
Slide the ring volume switch to HI or LO or OFF according to your need.
8. New call LED indicator
When there is a new ringing comes, the RING LED will fl ash.
9. Wall Mountable
It can be used as wall-mounted, and it can also be used for desktop.
6