Stihl FC 85 Manual De Instrucciones página 21

English / USA
: Place the unit on the ground: It must
rest securely on the engine support
and the cutting tool deflector. Check
that the cutting tool is not touching
the ground or any other obstacles.
:
Make sure you have a firm footing.
:
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube! This could permanently
damage the drive tube..
20
: Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might otherwise break.
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
:
Continue cranking until the engine
runs.
When engine begins to fire:
:
Move the choke lever to e and
continue cranking.
As soon as engine runs:
:
Blip the throttle trigger – the slide
control moves to the run position # –
and the engine settles down to idle
speed.
Make sure the carburetor is correctly
adjusted – cutting tool must not rotate
when the engine is idling.
Your machine is now ready for
operation.
To shut down the engine:
:
Move the slide control in direction of
c to $.
At very low outside temperatures:
As soon as engine runs:
: Blip the throttle trigger to disengage
the starting throttle position –
the slide control moves to the run
position # –
and the engine settles down to idle
speed.
:
Open the throttle slightly and allow
engine to warm up for a brief period.
FC 85