NEC AccuSync LCD22WMGX Manual Del Usuario página 8

4 x 12 mm with lock washer and flat washer
12 mm
M4
100 mm
100 mm
Controls
OSD (On-Screen Display) control buttons on the front of the monitor function as follows:
1. Basic Key function
SOURCE
Button
OSD Off Select Signal
OSD ON
(Main menu selection
stage)
OSD ON
(Sub menu selection
stage)
OSD ON
(Adjustment stage)
OSD Lock Select Signal
2. OSD Lock function
To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the
OSD press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
3. OSD structure
Main menu selection stage
Press
"MENU" key
OSD off
Press
"AUTO" key
Press
"- / <" or "+ / >"
Press
"AUTO" key
Main menu selection stage
01_English
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm.
Thickness of Bracket
Please use the attached screws (4pcs) as shown in the picture when
(Arm) 2.0 ~ 3.2 mm
installing. To meet the safety requirements, the monitor must be
mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor.
The LCD monitor shall only be used with an approved arm
Tighten all screws
(e.g. GS mark).
Specifications
4-SCREWS (M4)
(MAX depth: 10 mm)
– / <
AUTO
Active Auto Adjustment Shortcut to volume
function (Press over window
2 seconds)
Act Exit-key Cursor moves up
Act Exit-key Cursor moves up
Act Exit-key Adjust value decrease
or Cursor for adjust
moves left
Active Auto Adjustment Shortcut to volume
function (Press over window
2 seconds)
Press
"- / <" or "+ / >"
Press
"MENU" key
Press
"AUTO" key
Sub menu selection stage
English-4
4
Weight of LCD assembly: 5.0 kg (MAX) - LCD22WMGX
7.0 kg (MAX) - LCD24WMCX
+ / >
Shortcut to volume OSD displayed
window
Cursor moves down Go to Sub menu
selection stage
Cursor moves down Go to Adjustment stage
Adjust value increase or Go to Sub menu
Cursor for adjust moves selection stage
right
Shortcut to volume Message displayed
window "OSD Loked"
Select Item by using
"- / <" or "+ / >"
Adjust by using
"- / <" or "+ / >"
Press
"MENU" key
Press
"AUTO" or "MENU"
key
Adjustment stage
25/9/07, 12:15 PM
MENU