Operation; Charging The Battery - Blitz Master Wheel Manual De Instrucciones

Operating Instruction
GB

Operation

6 Operation
Warning
Observe all instructions contained in
the section "Safety" in these instruc-
tions and the valid accident prevention
regulations (VBG 1; VBG 14) while op-
erating the MW80
• The MW80 must only be operated by per-
sons with relevant qualifications.
• Only set the MW80 in motion when there
is no danger to persons.
• Keep the moving area of the lifter free at
all times and ensure that no persons are
present in this moving area.
• Do not exceed the maximum load bearing
capacity of the MW80.
• Do not climb on to the MW80, travel with it
or climb on to the load!
• Carry out lifting and lowering operations
evenly. Observe the load during move-
ment.
• Only use the lifter on a solid base.
• Only load, unload and lift when the brakes
are applied to the rollers.
6.1

Charging the battery

Warning
There is a risk of stumbling or falling
over the connecting cable. When
charging the battery, always park the
Master Wheel against a wall and make
sure that the charging cable does not
lie across a passageway.
Avoid explosive gases, flames and
sparks. Ensure there is sufficient
ventilation.
Batteries
The batteries do not require maintenance
and can be charged permanently. 100 % load
requires 14 hours; a standard load of 85 %
requires 6 hours. Always separate the charger
from the mains before making or opening
the connection to the battery. Never deep dis-
charge the battery. See charge level indicator.
123760 2018-11
Charger
Always use the matching mains plug. The
scope of delivery includes plugs for Europe
(EU), USA (US) and Great Britain (UK) (item
1).
Fig. 5:
LED display on the charger
Red Charging
Green Received
Yellow Battery polarity in-
versed
Tab. 4:
1
23