Introduction; Areas Of Operation; Warranty And Liability; Safety / Accident Prevention - Blitz Master Wheel Manual De Instrucciones

18
Operating Instruction
GB

Introduction

2 Introduction
Blitz lifting tools are the result of many years
of experience. The high quality standards
and the well-considered concept guarantee
reliability, durability and economic operations.
Please read these operating instructions care-
fully and adhere at all times to the contents in
order to avoid unnecessary damage and risks.
2.1

Areas of operation

The MW80 is exclusively designed to lift, low-
er and transport car tyres in car garages. In
this, the load must not exceed the load bear-
ing capacity of the appliance. The appliance
must not be used in areas that are exposed to
the risk of explosion.
Warning
Any other use, or any use that exceeds
the described scope, is deemed to be
improper. This applies in particular to
climbing on to the appliance, driving
with the appliance or using it as a sup-
port stand.
BlitzRotary GmbH will not be made liable for
damage that results from improper use. The
operator carries the exclusive risk for this.
The following is also deemed necessary for
proper use
• Adherence to all instructions in these ope-
rating instructions
• Adherence to inspection and maintenance
work and the specified tests.
2.2

Warranty and liability

Our "General terms of sales and supply"
apply. The operator has been in possession
thereof since the conclusion of the contract.
Warranty and liability claims for personal
and material damage are excluded if they are
based on one or more of the following circum-
stances:
• Improper use.
• Improper assembly, commissioning, op-
eration and maintenance of the appliance.
• Operation of the MW80 while the safety
installations are defect or improperly in-
stalled or non-functioning safety and pro-
tective installations.
• Failure to adhere to the instructions in the
operating instructions concerning trans-
port, storage, assembly, operation and
maintenance.
• Customer modifications to the MW80.
• Substandard monitoring of parts that are
subject to wear.
• Improperly implemented repairs.
• Catastrophes due to the influence of for-
eign bodies or acts of god.
We will not accept customer services claims
or the costs of return transport in the event of
there being a failure to adhere to these listed
points. Therefore, please contact the manu-
facturing plant before organising any return
transport.
2.3

Safety / accident prevention

The MW80 must only be operated by qualified
persons. Unauthorised persons are prohibited
from operating the appliance!
123760 2018-11