Transport And Assembly; Assembling The Feet; Assembling The Sliding Handle; Assembling The Wheel Support - Blitz Master Wheel Manual De Instrucciones

22
Operating Instruction
GB

Transport and assembly

4 Transport and assembly
The MW80 is supplied in a carton box ready
for operation. A suitable means of transport,
e.g. a high-lift truck, is required for transport.
Feet, handles and wheel support must be as-
sembled on the basis of the instructions.
4.1

Assembling the feet

1
2
Fig. 2:
Feet loosely screw on

Put Mobile Wheel Carriage even on sur-

face place
Tighten screws (1) and (2) (M12 x 20) with

a tightening moment of 60 Nm
4.2

Assembling the sliding handle

Fig. 3:
Position the sliding handle at the desired

height and connect it using screw (1)
The operating switch(2) is screwed on

beneath the rest.
4.3

Assembling the wheel support

Fig. 4:
Assembly according to figure 4

Ma1= 60Nm (M12x30)

Ma2= 40Nm (M10x30)

5

Commissioning

Warning
Check that the Mobile wheel carriage
is complete and in proper working
order before the first commissioning!
Record the results of the examination
in the maintenance plan.
1
2
123760 2018-11