Preparation; Channel And Audio Selection - Sony STW-C140X Manual De Instrucciones

Preparation

Before providing customers with units,
make prepare the units as follows.
Audio mode:
• Channel selection
• Audio selection

Channel and Audio Selection

Set the receiver box and the Data
Transmitter to the same channel, and select
HI (Hearing Impaired) or VI (Visually
Impaired) accordingly.
1
Make sure that the unit is turned off.
2
Press the POWER button to turn on
the receiver box.
The POWER indicator and channel
indicator start blinking.
3
Press the +/– button repeatedly to
select the channel.
There are two channel groups: "G"
(green indicator) and "Y" (yellow
indicator).
4
Press the SEL button to set the
channel.
The channel indicator stays lit.
The HI/VI indicator starts blinking.
5
Press the +/– button to choose HI or
VI.
6
Press the SEL button again to set the
audio setting.
The HI/VI indicator and POWER
indicator stay lit.
For Captioning mode, refer to the Operating
Instructions of STW-C140S/C140GI, or
consult your nearest Sony dealer.
13
GB