Declaration Of Conformity Ce; Troubleshooting - Promelit ALESSI TAB 2 Manual De Uso

13 Declaration of conformity CE

The AASTRA S.p.A. company, seated in Via Donat Cattin n. 20, in
Cernusco S/N (Milano), herewith declares that the AlessiTab product
is compliant with the basic requirements and the other relevant
provisions, as established by the R&TTE Directive 1999/5/EC.
In particular, the product meets the basic requirements of the Europe-
an Directives 2004/108/EC (EMC – Electromagnetic compatibility) and
2006/95/CE (LVD – Low Voltage DIrective).
The conformity with the above requirements is expressed by the marking
0197
released by TÜV Rheinland Group. released by TÜV Rheinland Group.
Health: EN 50385-EN 50383
Safety: EN 60950-1:2006+A11:2009
Electromagnetic compatibility (EMC):
EN 301 489-1 V 1.8.1
EN 301 489-17 V2.1.1
EN 55024:1998+A1:2001+A2:2003
Radio Part: EN 300328 V.1.7.1
The original declaration of conformity is available at the internet
address: www.alessitab.eu

14 Troubleshooting

In this section some of the problems that could occur during the
operation of AlessiTab² are described, together with further details
about some of the functionalities available from the product.
For more updated documentation the user is advised to visit periodi-
cally the web site: www.alessitab.eu
Problem
It is impossible to switch on the tablet.
Possible causes
- Low battery.
- ON/OFF switch off.
- The ALESSITAB² key was kept
pressed too shortly.
15
Possible remedies
- Recharge the battery.
Verify that the LED on the tablet
is red, once the battery is fully
charged the LED turns green.
- Move the switch from
OFF to ON.
- Keep the ALESSITAB² key
pressed for at least 2 seconds.
Model's User Manual