Care And Maintenance - babymoov Balancelle Bubble Manual De Instrucciones

B1. Installing baby in the rocker swing
WARNING: always use the 5-point safety harness provided.
IMPORTANT: make sure that the straps of the harness are not twisted.
• Fit baby in the rocker swing either sitting up or lying down. Figure 22
• Fasten the 5-point harness. Figures 23, 24 and 25
• Adjust the 5-point harness at the shoulders or waist if required.
B2. Inclination of the seat
WARNING: never change the inclination of the seat when baby is inside the rocker swing. Remove child before attempting any operation.
• Simultaneously press the push buttons (n) either side of the rocker swing and incline the seat to the desired position. Figure 26
B3. Folding up the rocker swing and transport
• Remove the toy bar (k) from the rocker swing. Fold up the seat. Figure 27
• Press the two push buttons either side of the rocker swing by simultaneously bringing together the legs of the rocker swing. Figure 28
o. On/Off button
p. Acceleration button
q. Slow down button
r. LED showing the swinging speed of the rocker swing
C1. On/Off button (o)
• Press the On/Off button (o) once to start the swinging.
ATTENTION: he rocker swing will always start at the swinging speed and with the music and loudness level selected the previous time.
• Press the On/Off button (o) again to switch off the rocker swing.
C2. Selection of swinging speed
Acceleration button (p)
ATTENTION: do not swing the rocker swing by hand, the desired speed will start up within 20 and 45 seconds after selecting the swinging speed.
• Press button (p) to accelerate the swinging speed.
• The LEDs (r), underneath the button (p), show the swinging speed (slower or faster). The faster the swinging the more LEDs will light up.
Slow down button (q)
• Press button (q) to slow down the swinging speed.
• The LEDs (r) underneath the button (q) show the slowing down speed. The slower the swinging the less number of LEDs will light up.
C3. Timer button (s)
Use the timer to set a swinging time.
• Press button (s) to choose a swinging time between 10, 15 or 30 minutes. The three LEDs (t), next to button (s), show the swinging time chosen.
If the timer option is not chosen, a 45 minute time will start up automatically.
C4. Button for choice of music and loudness level (u)
• Press button (u) to start up the music.
• Press button (u) again to increase the volume.
• Press button (u) a third time to switch off the music.
• Press button (u) a fourth time to change the melody, etc.
Composition
• Aluminium and PVC

Care and maintenance

• Check the rocker swing often for loose screws, worn parts, torn fabrics, or stitching that has come undone.
• Change or repair parts if required. Only use spare parts recommended by Babymoov.
• Clean the rocker swing regularly.
• The surfaces of the head cushion and cover of the rocker swing can be washed. Use a damp cloth and soap.
• To clean the frame of the rocker swing, only use household soap or a detergent and warm water. Never use bleach.
• Excessive exposure to the sun or heat may cause fading of colours or warping of parts.
C. STARTING UP THE ROCKER SWING
CARE AND MAINTENANCE
• Seat: 100% polyester (suedette and canvas).
BUBBLE ROCKER SWING • Instruction Manual
s. Timer button
t. LEDs showing the swinging time desired
u. Button for choice of music and loudness level
11