Water And Ice Dispensers - Sears Kenmore Elite 10655616400 Manual De Uso Y Cuidado

Digital Controls
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the mid-settings as shown. The digital control panel
is located at the top of the refrigerator compartment and enables
you to view the temperature control set points.
NOTE: The factory recommended set points are 0°F (-18°C) for
the freezer and 37°F (3°C) for the refrigerator.
To turn refrigerator on and view set points:
• Press and hold ON/OFF for 2 seconds.
C0LD FREEZER REFRIGERATOR C0LD
COLDER COLDER
To view the Celsius temperatures:
• Press the °C SELECT touch pad. The indicator will light up.
NOTE: If the freezer temperature is below zero, the indicator light
next to the freezer display will light up.
Adjusting Digital Controls
To adjust set point temperatures:
• Press the refrigerator or freezer up or down arrow until the
desired temperature is reached.
REFRIGERATOR COLD
COLDER
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures before other adjustments are
made.
The set point range for the freezer is -5°F to 5°F (-21 °C to
-15°C) and 33°F to 41 °F (1 °C to 5°C) for the refrigerator.
CONDITION/REASON: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR
- Not set correctly for your Control 1o higher
conditions
REFRIGERATOR too warm REFRIGERATOR
- High use or room very warm Control 1o lower
FREEZER too cold FREEZER Control 1°
- Not set correctly for your higher
conditions
FREEZER too warm/too little ice FREEZER Control 1o
- High use or heavy ice use lower
Additional Digital Control Panel Features
Additional features are located on the control panel at the top of
the refrigerator compartment.
GrocerySavor
TM
The GrocerySavor
TM
feature assists with periods of high
refrigerator use, full grocery loads, or temporarily warm room
temperatures.
• Press GrocerySavor
TM
to set the temperatures to
-10°F (-23°C) for the freezer and 34°F (1°C) for the
refrigerator. The GrocerySavor
TM
indicator light will remain on
for 24 hours unless manually turned off.
NOTE: The temperature display will not change. After
24 hours, the refrigerator and freezer compartments return to
the previous temperature set points.
Accelerated Ice Production
This feature assists with temporary periods of heavy ice use by
increasing ice production over a 24-hour period.
• Press the accelerated ice production touch pad to set the
freezer temperature to -10°F (-23°C). The accelerated ice
setting will remain on for 24 hours unless manually turned off.
The display will continue to display your normal temperature
set point.
NOTES:
• The temperature display will not change. After 24 hours, the
freezer temperature returns to the previous temperature set
point.
If increased ice production is desired at all times, set the
Freezer control to a colder number. Setting the freezer to a
colder temperature may make some foods, such as ice
cream, harder.
Cut Hazard
Use a sturdy glass when dispensing ice or water.
Failure to do so can result in cuts.
Your electronic dispenser offers several options: the ability to
select crushed or cubed ice, a special light that turns on when
you use the dispenser and can be set to Auto mode, and a lock
option to avoid unintentional dispensing.
10