Operation - Unold 18575 Instrucciones De Uso

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

oPeRation

Due to it's power rating and protective class the travel kettle cannot be operated
with an Euro plug (dipole). Please check before your travel which type of power
sockets are used in the respective country and check if your travel adapter has
the correct socket for the kettle. Please check also the available voltage in the
travel country.
The travel kettle 18575 cannot be switched off by operating the switch, but only
by the automatic boil stop. Therefore it might happen that the appliance starts
immediately to heat after being connected to the power socket. In such case
bring the water to the boil and wait until the automatic boil stop switches off the
appliance. For the next boiling cycle use the ON-switch. Wait always until the
appliance is switched off automatically.
1. Remove all packaging materials
and any transport safety devices.
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. The appliance has a dual voltage
selector for 120/230~ V. Select
the required voltage by turning
the selector control with a coin
into the correct position before
using the kettle.
4. Open the lid to fill in water. When
using the appliance for the first
time fill the kettle with water up
to the MAX mark.
5. Do not fill the kettle with more
than 0,5 l of water and less than
0.2 l.
6. CAuTIon!
If the kettle is overfilled, boiling
water may be ejected and may
damage the appliance!
7. Make sure, that the lid is closed
correctly
8. Plug the power cord into the
power socket.
14
CAuTIon!
9.
If by any reason whatsoever the
appliance has not been switched
off automatically by the boilstop
during the last use, it starts
immediately to heat after the
plug has been put in the power
socket. In this case wait until the
water boils and the automatic boil
stop switches the appliance off.
For the next boiling use the ON
switch to switch the appliance on.
10. Switch on the kettle by pressing
the ON/OFF switch. The control
lamp turns on.
11. Bring the water to boil and then
pour out the water. Then refill
with fresh water and boil again.
12. The kettle automatically stops
heating when the water boils at
the latest.
13. Please allow the kettle to cool
down for a certain time before
using the kettle again to heat
water.
14. CAuTIon!
As soon as the switch has been
pressed, the appliance cannot be
switched off manually, but only
by the automatic stop when the
water boils.
15. Always use fresh and cold water.
Do not leave water in the kettle.
16. Switch off and unplug electrical
appliances after use.