Use As Directed - SLV Elektronik LED PENLIGHT PRO Instrucciones De Servicio

SLV Elektronik GmbH
ENGLISH
INSTRUCTION MANUAL FOR
LED PENLIGHT PRO 230V
1. NOTES ON SAFETY
Installation, mounting or works on the electrical connection may
only be carried out by an approved electrician.
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no
decoration.
Keep children away from the product.
Operate the product only when it functions properly:
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
If touched or further operated there is danger from electric shock,
burning, or fire.
A malfunction exists when:
visible damages appear.
the product does not work properly (e.g. flickering).
smoke, steam or crackling sounds appear.
smell of burning is recognisable.
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
2.

USE AS DIRECTED

This product serves exclusively lighting purposes and may:
only be used with a voltage of 230V ~50Hz-60Hz.
only be operated when firmly mounted.
not be exposed to strong mechanical loads or to strong
contamination.
only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
not be modified or converted.
3. MAINTANANCE AND CARE
Disconnect the product from the power supply and let it cool down,
before you clean the product.
If disregarded there may be danger of electric shock or by burning
when cleaning the product.
Cleaning: Clean the product on a regular basis using a slightly
moistened, soft and fluff-free cloth. Please also note additional
supplied notes on maintanance and care.
4. ADDITIONAL IMPORTANT NOTES
Storage: The product must be stored in a dry and clean environment. Do
not strain the product mechanically during storage.
Warranty: In case of a warranty contact your dealer.
Disposal: Notes on the correct disposal in Germany are found on
www.slv.de.
5. INSTALLATION
(only by an approved electrician)
Switch off the mains or respectively the connection lead before doing
.
any works
There exists mortal danger from an electric shock.
Use only parts, which are supplied with the product or are described as
accessories!
Otherwise the product or the whole installation may not be secure.
Danger for life or danger of fire may exist!
Inspect the product for loose parts inside the housing. When there are
loose parts inside the housing and these are not explicitly described the
product may not be installed or operated.
The housing maybe voltage-carrying. Danger of electric shock!
Use the supplied fastening material only when it is suited for the
installation background. If this is not the case use only fastening material
suiting the installation background.
When using fastening material that is not suitable there may be
danger from falling objects.
Unpacking
Carefully take the product out of the packaging removing any transport
safeguards.
Before disposal of the packaging material make sure that all
components of the product are removed.
Installation place
Make sure that the product is mounted on a stable, even and tilt-fixed
background.
Important Notes
It is not allowed to strain the product mechanically. Make sure the light
chain is not damaged by sharp edges and the like when installing it.
The minimum bending radius is 30 mm.
Never operate the product in its packaging or rolled up.
Do not connect this ropelight to other ropelights.
Separate Installation Steps
The attachment of end caps (SLV-art.-no. 232691) and any connectors
(SLV-art.-no. 232641) must be carried out water-proof (1).
Cutting (2)
Be sure to cut the LED PENLIGHT PRO 230V only at the designated
marks!
Wrongly cut pieces must be discarded for safety reasons.
Connecting two ends (3)
Ensure a reliable electrical connection.
Push one sealing ring on each end.
Press the stepped, pointedly forthcoming contacts connector firmly into
the wire ends of the two tube ends.
Put both tube ends in one half shell of the connector housing. Put the
other half shelf on top of it and screw it firmly to the lower half shell of
the housing.
Connection to feed-in
The LED PENLIGHT PRO 230V is ready for connection, featuring a
sealed-in connector.
Installation (4)
Use the fastening clips (SLV-art.-no. 232651, 232681) or the profile
(SLV-art.-no. 232661) for mounting on a surface.
art.-no. 232711/12/17 232741/42/47
06/2011 © SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-
Palenberg, Germany, Tel. +49 (0)2451 4833-0
Technical Details are subject to change.