Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Working range
–Standard . . . . . . . . . . . . . . .up to 30ft(10m)
Leveling Accuracy . . . . . . .up to ±1/4"@ 30ft
Fan Angle . . . . . . . . . . . . . . . . . . . . . . . .120°
Leveling Range . . . . . . . . . . . . . . . . . . . ±4°
Leveling duration . . . . . . . . . . . . . . . . . . .3 s
Laser Class . . . . . . . . . . . . . . . . . . . . . . .2M
Laser Beam Power . . . . . . . . . . .635-660nm
Operating
temperature range . . . . . . . . . . .41°F ~104°F
Initial Operation
• Protect the tool against moisture and
direct sun irradiation.
• Do not subject the tool to extreme
temperatures or variations in
temperature.
As an example, do not leave it in vehicles
for longer periods. In case of large
variations in temperature, allow the tool to
adjust to the ambient temperature before
putting it into operation. In case of extreme
temperatures or variations in temperature,
the accuracy of the tool can be impaired.
• Avoid heavy impact or and prevent the
tool from falling. After heavy exterior
impact on the tool, an accuracy check
should always be carried out before
continuing to work (see
"Leveling Accuracy").
• Switch the tool off during transport.
Switch off the leveling unit, which can be
damaged in the case of intense movement.
Turning on the Tool
To switch on the tool, push the On/Off
switch 1 once. Immediately after switching
on, the tool sends one laser beam out of the
exit opening 3.
• Do not point the laser beam at persons
or animals and do not look into the
laser beam yourself, not even from a
large distance.
Technical Data
(±6.4mm at 9m)
≤1mW max.
(+5°C ~ +40°C)
Operation
-7-
Storage
temperature range. . . . . . . . . . -4° F ~ 158°F
Batteries . . . . . . . . . . . . .3 x 1.5 V LR6 (AA)
Operating lifetime, approx. . . . . . . . . . . . 15h
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 1.1lb
(including 3 `AA' alkaline batteries)
Tripod mount . . . . . . . . . . . . . . . . . . . .1/4-20
Dimensions . . . . . . . . . . . . .2.4" x 3.2" x 3.6"
To switch off the tool, push the On/Off
switch 1 four more times. When switching off,
the levelling unit is locked.
• Do not leave the switched on tool
unattended and switch the tool off after
use. Other persons could be blinded by the
laser beam.
Automatic Leveling
Working with Automatic Leveling
Position the tool on a level and firm surface,
hold it by the b against a vertical surface or
attach it to a tripod 8.
After switching on, the leveling function
automatically compensates irregularities
within the self-leveling range of ±4°. The
leveling is finished as soon as the laser
beams do not move any more. The indicator
2 lights up green.
If the automatic leveling function is not
possible, e. g. because the surface on which
the tool stands deviates by more than 4°
from the horizontal plane, the indicator 2
lights up red and the lasers automatically
begins to flash. In this case, bring the tool to
the level position, and wait for the self
leveling to take place. As soon as the tool is
within the self-leveling range of ±4° again,
the indicator
2
lights up green and the laser
beams are switched on.
(-20°C ~ +70°C)
(0.5 kg)
(60.5 x 79.8 x 92mm)
Tabla de contenido
