Technical Data; Ec Declaration Of Conformity; Paper Shredder Securio B24 - HSM securio B 24 Instrucciones De Servicio

Ocultar thumbs Ver también para securio B 24:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

9 Technical data

Cutting type
Cut size (mm)
Security level DIN 32757 - 1
Cutting capacity** (sheets), A4
Weight
Cutting speed
Intake width
Power supply
Power consumption
with max. number of sheets
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running/ load)
* HSM-specifi cation
** The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.

EC Declaration of Conformity

The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder Securio B24
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2000 + A1:2001 + A2:2002
• EN 61000-3-2:2000 + A2:2005
• EN 61000-3-3:1995 + A1:2001
• EN 55014-2:1997 + A1:2001
• EN 60950-1:2006 + A1:2009
Frickingen, 01.03.2010
Rolf Gasteier - Technical Director
The machine type was tested for compliance with the requirements of the EC directives by:
TÜV SÜD Product Service GmbH, Zertifi zierstelle, Ridlerstrasse 65, 80339 München/Germany
This test centre is responsible according to the EC directives.
09/2011
Strip cut
5.8
3.9
2
70 g/m
28 - 30
22 - 24
2
80 g/m
25 - 27
19 - 21
2
18 kg
230 V, 50 Hz
• EN 61000-4-2:1995
• EN 61000-4-4:1995
• EN 61000-4-5:1995
• EN 61000-4-6:1996
• EN 61000-4-11:1994
SECURIO B 24
english
Cross cut
4.5 x 30
1.9 x 15
2
3
4
17 - 19
11 - 13
14 - 16
9 - 11
65 mm/s
240 mm
110 V - 120 V, 60 Hz
500 W
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
395 x 317 x 605
34 l
56 dB (A) / 59 - 63 dB (A)
0.78 x 11
1 x 5
5
Level 6*
7
5
6
4
20.5 kg
220 V, 60 Hz
17
Tabla de contenido
loading

Tabla de contenido