Maintenance; Decommissioning; Spare Parts Service; Warranty Conditions - Schneider Airsystems SBS 700 SYS Manual De Instrucciones

4. If present: Install the air supply / dis-
charge hose (item 15).
5. See part 1 "Commissioning" of the in-
struction manual for information on at-
taching abrasives and tools.
Compressed air connection:
1. Install an upstream maintenance unit
with filter pressure reducer and mist oil-
er.
2. Press the quick-action coupling of the air
hose onto the plug nipple (item 01)
(Figure 1a).
Operation:
1. Attach the tool to the object being pro-
cessed.
2. Actuate the safety lever (item 08), if
available (Fig. 6a) and press the trigger
lever (item 02).
3. If there is no trigger lever (item 02):
Turn the rotary valve / air regulation
(item 03) accordingly (Fig. 7a).
4. If air regulation available:
adjust the
regulation point (item 03) (Fig. 8a).
After use:
1. Disconnect the quick-action coupling
from the plug
(Figure 1b).
2. Remove the abrasive / tool.
3. Clean and store the device in dry condi-
tion
2.5

Maintenance

Regular lubrication is required!
Oil using a maintenance unit
with filter pressure reducer and mist oiler.
Add oil manually into the
plug nipple (item 01).
For long breaks in operation, also oil via
plug nipple (item 01) using special oil for
compressed air tools.
torque at the
nipple (item 01)
2.6

Decommissioning

Storage: Clean, dry, dust-free, not below
5° C.
Disposal: Dispose of the packaging / device
/ materials used according to applicable legal
regulations.
2.7

Spare parts service

Visit our website
tems.com/td/ for the latest version of all ex-
ploded drawings and spare parts lists for our
products. If you have any special questions,
please consult the Schneider Airsystems Ser-
vice centre in your country (addresses in the
service appendix) or your local dealer.
2.8

Warranty conditions

Basis for warranty claims: complete unit
in original condition/proof of purchase.
According to legal provisions, you re-
ceive the following warranty against
material and manufacturing defects:
private use only: 2 years,
air
commercial use: 1 year.
Excluded from warranty claims: Wear or
expendable parts, improper use, overloading
/ incorrect pressure, manipulation / inappro-
priate use, inadequate / incorrect / lack of
maintenance or lubrication, bumps / im-
pacts, dust / dirt accumulation, unauthorised
/ incorrect working procedures, incorrect
power supply, impure / insufficiently filtered
compressed air, failure to read the instruc-
tion manual, incorrect operating resources /
materials.
SLM
www.schneider-airsys-
II/ 9
GB