Rds (Only For Europe) - Teac SL-D930 Manual Del Usuario

The Radio Data System (RDS) is a broadcasting service that
allows stations to send additional information along with
regular radio programme signals.
o RDS works on the FM frequency band in Europe
only.
1
Tune in to an FM RDS station (page 36).
The RDS indicator appears.
2
Press the RDS button on the main unit or
the remote control.
Pressing the RDS button cycles through RDS modes as
follows:
PS (Program service name)
When you select PS, the station's name will be displayed. If
there is no PS data, "NO PS" will be displayed.
PTY (RDS program type)
When you select PTY, the program type will be displayed.
If there is no PTY data, "NO PTY" will be displayed.
38 38

RDS (only for Europe)

RT (Radio text)
When you select RT, up to 64 characters of information
transmitted by the station will be displayed.
If there is no RT data, "NO TEXT" will be displayed.
CT (RDS clock time)
When you select CT, the clock time provided from the sta-
tion will be displayed.
If there is no CT data, "NO CT" will be displayed.
RDS clock time (CT)
The clock setting will be automatically adjusted accord-
ing to the CT data.
If you tune in to an RDS station broadcasting incorrect
CT data, the clock could be set incorrectly, and this
could affect timer operation.
No matter which RDS mode is selected, the unit
receives CT data and adjusts the clock.
To turn the CT mode on and off, press and hold
the INFO button for more than two seconds, then
turn the volume knob to select on or off.