Foppapedretti LUNAPARK Manual De Instrucciones página 15

• ENGLISH •
ASSEMBLY
Insert the rear connection tube in the frame on the left and right side.
The components will be properly assembled when the metal pins lock into the holes on the tubes; a
"click" will indicate that they have been locked into place. Pull lever "A" outwards while at the same
time inserting the rear connection tube into joint "B": a "click" will indicate that it has been successfully
locked (position 1). Repeat this action for the other side (fig. 1-2-3-4).
Insert the rear bar of the backrest into indicated slot "C".
The components will be properly assembled when the metal pins lock into the holes on the tubes; a
"click" will indicate that they have been locked into place. Repeat this action for the other side (fig. 5-6).
Fix the music device to the frame by inserting it into the indicated slot (fig.7).
Attach the stuffed toys onto the canopy as indicated in figure (fig.8).
Attach the toy canopy on both sides of the frame as indicated in figure.
Check that it has been assembled correctly (fig.9-10).
HOW TO USE
Place the baby on the seat, as shown in figure.
Position the crotch straps between the baby's legs and insert the fastening tabs into the side, right and
left buckles. Make sure at this time that the baby's hands are not close to the buckles. A click will indicate
that they have been correctly attached.
To adjust the safety belt to your child's size, pull the loose end of the strap.
Caution: Do not adjust the belt too tightly; correct adjustment should allow you to insert one finger
between the strap and your child.
15