Mounting The Inverter - SMA SUNNY TRIPOWER CORE1-US Instrucciones De Instalación

5 Mounting
5.2

Mounting the Inverter

Risk of injury due to the weight of the inverter
Injuries may result if the inverter is lifted incorrectly or dropped while being transported or when
mounting it to the wall mounting bracket.
• Carry and lift the inverter upright with the help of several people. In doing so, keep in mind
the weight of the inverter and take hold of the carrying handles on the inverter. Always take
hold of the two carrying handles mounted both on each side.
• Transport the product using the carrying handles or hoist. Take the weight of the product
into account.
• Do not use the carrying handles as attachment points for hoist equipment (e.g. straps, ropes,
chains). Insert eye bolts into threads provided on top of the product to attach the hoist
system.
• Use all carrying handles provided during transport with carrying handles.
• Take into account the center of gravity of the inverter. The center of gravity is on the side of
the AC-Connection Unit.
Additionally required material (not included in the scope of delivery):
☐ For transport with a hoist: 4 eye bolts (M8)
Procedure:
1. Attach each foot with two M8x40 hexagon head
screws and two washers on the two external taps
(M8x14) on the underside of the inverter (torque:
16 Nm (142 in-lb)). Press the packaging on the
bottom side down or cut it open. The screw holes on
the bottom of the inverter must be exposed.
2. Screw the transport handles as far as they will go
into the taps on the right- and left-hand side until
they lie flush with the enclosure. When doing so,
ensure that the transport handles are screwed into
the taps so that they are perfectly straight. If the
transport handles are not screwed in straight, this
can make it more difficult or even impossible to
unscrew them later on and can damage the taps to
the extent that transport handles can no longer be
screwed into them.
24 STP33-62-US-41-IA-xx-12
CAUTION
SMA Solar Technology AG
4x
4x
Installation Manual